(1) Take a piece of 1 x 1 Memory Glass and place it over the section of your photograph that you would like to frame. Trace around the piece of glass with a fine point Sharpie. Cut out photo, being sure to cut inside the lines, so none of the edges stick out past the glass. Repeat for as many photos as you will be using.
(2) Prepare a 1 x1 Memory Frame by opening the frame slightly. Sandwich your photo between two pieces of Memory Glass and tuck inside the channel of the frame. Wrap the Frame around so that the tab can be inserted into its proper slot at the other end of the Frame. Burnish tab down with a bone folder. Repeat for all photos.
(3) To assemble the bracelet, simply remove one of the split rings from each adjoining Frame, and join together with remaining split ring. Keep the extra split rings on the ends of your bracelet, so that you may attach your toggle closure or clasp.
